tapered

英 [ˈteɪpəd]

美 [ˈteɪpərd]

v.  (使)逐渐变窄
taper的过去分词和过去式

过去式：tapered　

BNC.32826 / COCA.21802

柯林斯词典

• V-ERG (使)一端逐渐变细;(使)变锥形
  If somethingtapers, or if youtaperit, it becomes gradually thinner at one end.
  1. Unlike other trees, it doesn't taper very much. It stays fat all the way up...
     和别的树不同，它不是越往上越细，而是上下一样粗。
  2. ...beautiful hands with long, tapering fingers...
     手指修长纤细的一双美手
  3. Taper the shape of your eyebrows towards the outer corners.
     把你的眉毛修剪成越往外眼角越细的月牙形。
• V-ERG 逐渐减少;逐渐缩小
  If somethingtapersoris tapered, it gradually becomes reduced in amount, number, or size until it is greatly reduced.
  1. There are signs that inflation is tapering...
     种种迹象显示，通货膨胀率在逐渐下降。
  2. If you take these drugs continuously, withdrawal must be tapered.
     如果你一直在服用这些药，停药时一定要逐渐停。
  3. Taper offmeans the same astaper.
     taper off 同 taper
  4. Immigration is expected to taper off...
     估计移民会越来越少。
  5. I suggested that we start to taper off the counseling sessions.
     我建议我们开始缩短咨询服务的时间。
• 细长蜡烛;点火木片
  Ataperis a long, thin candle or a thin wooden strip that is used for lighting fires.

英英释义

adj

• becoming gradually narrower
  1. long tapering fingers
  2. trousers with tapered legs
  Synonym:taperingnarrowing

双语例句

• The tapered end must be secured on the wheel carrier in the direction of travel.
  必须将锥形端按行程方向固定在车轮托架上。
• Stability Analysis and Dynamic Simulation of Tapered Cylinder Driving System
  锥形筒体传动系统稳定性分析与动态仿真研究
• Tapered roller bearings are generally used to support combined load mainly consisting of radial load.
  圆锥滚子轴承主要用以承受以径向载荷为主的径向与轴向联合载荷。
• The screw fixing hole and the screw adjusting holes are tapered counter bores.
  螺钉固定孔、螺钉调节孔为锥形沉孔。
• If you take these drugs continuously, withdrawal must be tapered.
  如果你一直在服用这些药，停药时一定要逐渐停。
• A small dagger with a tapered blade.
  一种小的具有缩短的刃的匕首。
• A fastener with a tapered threaded shank and a slotted head.
  由带螺纹的连杆和槽头组成的扣件。
• A threaded neck ring is attached to the tapered end so that a protective cylinder cap can be installed.
  锥状顶端装有带螺纹的颈环，可以安装保护性的钢瓶帽。
• The M-shaped jet plate, the tapered end plates and the column plate are formed into a cover.
  由M形的喷射板和锥形端板、分离板组成罩体。
• Tapered bushing feature provides for easy installation and removal of the mixer shaft while still ensuring a tight connection.
  连续循环系统上卸扣卡瓦卡紧力计算方法研究锥形轴承套的特点是：在正常坚固联接的混合器上，可以容易地安装和卸下它的轴。