N头条>英语词典>crosswise翻译和用法

crosswise

英 [ˈkrɒswaɪz]

美 [ˈkrɔːswaɪz]

adv.  横过地; 贯穿地; (尤指)对角横穿地,斜穿地; 成十字地; 交叉地

机械

COCA.17021

牛津词典

    adv.

    • 横过地;贯穿地;(尤指)对角横穿地,斜穿地
      across, especially from one corner to the opposite one
      1. Cut the fabric crosswise.
        把那块布对角剪开。
    • 成十字地;交叉地
      in the form of a cross

      柯林斯词典

        in AM, also use 美国英语亦用 crossways

      • ADV 对角横穿地;斜穿地
        Crosswisemeans diagonally across something.
        1. Rinse and slice the courgettes crosswise.
          将西葫芦洗干净,斜着切成片。

      英英释义

      adj

      • in the shape of (a horizontal piece on) a cross
        1. lying or extending across the length of a thing or in a cross direction
          1. a crosswise street
          2. the crosswise dimension

        adv

        • transversely
          1. the marble slabs were cut across
          Synonym:acrosscrossways
        • not in the intended manner
          1. things are going crosswise

        双语例句

        • In this city the crosswise streets all go uphill.
          这个城市的横街道全是上坡路。
        • The transmission mounts crosswise in the vehicle.
          中等横向加速转向运动变速轮横装于车上。
        • Peel and wash the eggplant into pieces, the skin surface can be some of his carving knife crosswise.
          茄子洗净去皮切成片,在皮的表面可以自己雕刻一些十字花刀。
        • The yarns running in the lengthwise direction are called warp yarns and the yarns running crosswise are called weft.
          在纵长的方向的纱称为经;和之交叉的称为纬。
        • Application of crosswise training for nursing staff in operating room of general hospitals
          交叉培训在综合性医院手术室护理人员继续教育中的应用
        • Cut or used for cutting crosswise or across the grain.
          交叉的切、用来交叉的切或者对着横纹切。
        • The reinforcement plans have been determined in this article, which in foundation of analysis massive calculation data, and overall evaluation crosswise and vertical rigidity change.
          在分析大量计算数据的基础上,综合考虑梁体横向和竖向刚度的变化,确定了较为合理的加固方案。
        • Peel carrots and parsnips; halve crosswise to separate thick and narrow parts.
          为胡萝卜和欧防风去皮;斜切,把厚的和薄的部分分开。
        • In most knee-type milling machines, there are three possible table movements: longitudinal, crosswise, and vertical.
          在大多数升降台式铣床上,工作台可以有三种运动方向:纵向,交叉以及垂直方向。
        • Always loosen and tighten screws crosswise and in several stages.
          务必分几个阶段交叉松开和拧紧螺钉。